PRODUCT DATASHEET // LAYER 1 HARDWARE DATA DIODE

1.25 Gbit/s SFP hardware data diode (Layer 1 separation)

One-way optical transmission over a single 9/125 µm single-mode fibre (simplex LC, 1310 nm, up to 10 km).

SERIESRT-DD-1G-10K-SM
OSI LAYERLayer 1 (physical)
STANDARDSFP MSA / SFF-8472 (DDM)
MANUFACTURERRUTKOWSKI.TECH
UPDATED
OT SIDE MODULE (SITE, PROTECTED ZONE) RT-DD-1G-10K-SM-TX

SFP module for a switch or media converter on the protected industrial network (OT). It sends a one-way 1310 nm stream into a single simplex LC fibre and physically cannot receive any packet from outside.

IT SIDE MODULE (SERVER, DMZ, CLOUD) RT-DD-1G-10K-SM-RX

SFP module for the external network, the DMZ or the monitoring server. It receives the one-way 1310 nm stream from the single simplex LC fibre and physically cannot send any signal back into the OT zone.

STARTER KIT WITH MIKROTIK // ONE-TIME PURCHASE

A fraction of the price of conventional data diodes, with no subscription

We supply the RT-DD-1G-10K-SM-TX and RT-DD-1G-10K-SM-RX pair, MikroTik hardware and basic commissioning support. You pay once, with no annual licence fees. We also sell the SFP pairs on their own.

DEMO KIT // LIVE DEMONSTRATION & TESTS

See the diode working before you buy

Our demo kit is ready to go. We will show it to you live and test your protocols (Modbus, OPC UA, MQTT, Zabbix/Grafana) and machines (Windows XP/7/DOS/Linux).

01 / Key features

  • One-way at Layer 1: the direction of transmission comes from how the optical path is built, so no packet can cross the diode link from IT to OT, whatever the configuration of the network devices.
  • Data rate up to 1.25 Gbit/s (Gigabit Ethernet, 1G Fibre Channel).
  • Compliant with SFP MSA and SFF-8472 digital diagnostics (DDM).
  • Hot-pluggable simplex LC optical connector. Transmission over one 9/125 µm single-mode fibre for up to 10 km.
  • Metal housing with EMI shielding, RoHS 6/6 compliant.
  • Operating case temperature ranges (Tc): commercial 0…+70 °C and industrial −40…+85 °C.

02 / Applications

  • Permanent hardware separation of industrial (OT) networks from company (IT) networks and the cloud, helping meet NIS2 and IEC 62443 requirements.
  • Protection of machines and industrial PCs running old, unsupported software (Windows XP, Windows 7, MS-DOS, old Linux) that must stay in operation.
  • Non-invasive telemetry export (UDP, Zabbix, Grafana, MQTT, Modbus/OPC UA proxy, Syslog) from protected zones, with no risk to PLCs.
  • Switch-to-switch and router/server links at the boundary between security zones.

03 / Layer 1 connection diagram (one-way simplex LC path)

PROTECTED ZONE (OT) RT-DD-1G-10K-SM-TX Optical output: Single TX (1310 nm) SFP MSA · SFF-8472 DDM · simplex LC LAYER 1: ONE SMF FIBRE 1.25 Gbit/s · 1310 nm · 10 km ✕ NO PHYSICAL RETURN PATH IT ZONE (SERVER / CLOUD) RT-DD-1G-10K-SM-RX Optical input: Single RX (1310 nm) SFP MSA · SFF-8472 DDM · simplex LC

04 / Power supply & operating conditions

Parameter Symbol Min. Typ. Max. Unit Notes
Supply voltage Vcc 3.13 3.30 3.46 V Absolute maximum rating: 3.6 V
Supply current (one module) Icc — — 300 mA Powered from the host SFP slot
Operating case temperature (commercial / industrial) Tc 0 / -40 — +70 / +85 °C Relative humidity 0–85 % (non-condensing)
Storage temperature Ts -40 — +85 °C —

05 / Optical & transmission characteristics

Parameter Symbol Min. Typ. Max. Unit Notes
Data rate DR — 1.0625 / 1.25 — Gbit/s Gigabit Ethernet (IEEE 802.3z) / 1G Fibre Channel
Centre wavelength λc 1260 1310 1360 nm One-way transmission (OT → IT)
Average transmitter launch power (RT-DD-1G-10K-SM-TX) Pavg -9.0 — -3.0 dBm Launched into 9/125 µm single-mode fibre
Maximum receiver input power (RT-DD-1G-10K-SM-RX) Pmax — — 0 dBm Loss of Signal (LOS) output
Reach L — 10 — km Simplex LC connector, one 9/125 µm single-mode fibre

06 / Ordering information

Part number (SKU) Installation side / role Description
RT-DD-1G-10K-SM-TX OT side (site, protected zone) Transmitter module: 1.25 Gbit/s, 1310 nm, 10 km, simplex LC, SMF, DDM diagnostics (SFF-8472)
RT-DD-1G-10K-SM-RX IT side (server, DMZ, cloud) Receiver module: 1.25 Gbit/s, 1310 nm, 10 km, simplex LC, SMF, DDM diagnostics (SFF-8472)
RT-DD-1G-STARTER-MT Complete OT → IT starter kit SFP module pair (RT-DD-1G-10K-SM-TX + RX), MikroTik hardware and basic commissioning support. One-time purchase with no subscription, at a fraction of the price of conventional data diodes.
RUTKOWSKI.TECH · Michał Rutkowski · Gaj Mały 113d, 64-520 Obrzycko · Tel: +48 535 535 484 · [email protected]
Book a live demo or order the kit →